? Lock off throttle to prevent accidental start up ? Rear exhaust directs air away from workpiece ? Built-in regulator matches speed to job ? Applications: cutting through sheet metal, fiberglass, bolts, muffler clamps and hangers; also grinds down burrs and rough edges ? Free Speed: 22000 rpm Specifications: Wheel Size in.: 2-7/8 Weight lb.: 1-3/4 Length in.: 7-1/4 Average Air Consumption CFM: 5 Air Inlet NPTF in.: 1/4 Free Speed rpm: 22000 Model Number 874 By Chicago Pneumatic.
? 5/16'' punch ? Performs hole punching and panel crimping ? Features a rotating head for convenient use ? Precise control - every pull of the lever delivers a single punch or a single flange crimp ? Forms an offset crimped edge on sheet metals for no-bump lap welds ? Lightweight, yet ruggedly built ? Cuts metal fabrication time in halfBy Astro Pneumatic.
? Heat-treated components add durability and ensure long life ? Patented TwinPawl?Plus head design maintains positive pawl engagement and prevents spreading and lock-up for consistent top performance ? Exclusive two speed power grip ring for convenient power output selection ? Composite housing maintains a comfortable temperature and low noise levels ? Lever-style modulated throttle provides precise control ? Textured, ergonomic grip area fits the palm of your hand ? 360 degree directionally controlled exhaust keeps air flow away from work area ? Plenty of power and speed, with 25 ft.-lbs. of maximum torque and 270 rpm Model Number 1103 By Ingersoll-Rand.
? Rugged, energy efficient 1/2 hp motor ? Rear exhaust directs air away from work ? Square handle design for positive grip ? Lightweight - only 1-5/8 lb. ? Applications: cutting through sheet metal, fiberglass, bolts, muffler clamps and hangers; also grinds down burrs and rough edges ? Free Speed: 20000 rpm Specifications: Wheel Size in.: 2-7/8 Weight lb.: 1-5/8 Length in.: 7-3/4 Average Air Consumption CFM: 5 Air Inlet NPTF in.: 1/4 Free Speed rpm: 20000 Model Number 861 By Chicago Pneumatic.
? In-line filter protects air tools from dirt and debris and can be attached directly to pneumatic tools? 1-9/16'' length, 1/2 oz.? 40 micron sintered bronze element? 1/4'' NPT Male x Female Ends
The number one killer of air tools is lack of proper lubrication. Acme Air Tool Oil is designed to lubricate and fight moisture. Keep your air tools in top shop for a lifetime with Acme Air Tool Oil. By Acme Automotive.
Standard Model. High quality aircraft aluminum stem, precisely machined to 1/4'' NPT. Oil reservoir is fabricated of high impact plastic. Technician always sees oil supply and oiling action. Holds three to four days supply of oil. With each use of the air tool, a fine mist of precisely metered oil enters the air stream. All internal moving parts are coated and lubricated. Use on all 3/8'' and 1/2'' air impact guns, air wrenches, body shop air tools and pneumatic hammers. 1/4'' NPT Female inlet x 1/4'' NPT Male outlet.By Tool Aid.
? Exhaust replacement is this powerful tools specialty. Now you can cut-off mufflers and tail pipes quickly, efficiently, and quietly. It has an 18, 000 rpm motor that can handle the toughest exhaust replacements and cut sheet metal, nuts and bolts. 3/8'' arbor x 2-7/8'' cutting wheel size (standard 3'') ? Fast and quiet ? Countoured lever throttle with positive self locking action ? Built in speed regulator ? 360 degreee rotatable chrome-plated spark guard Specifications: Free speed: 18, 000 rpm Weight: 2.3 lbs. (1.04 kg) Length: 8.88'' (226 mm) Average air consumption: 10 cfm, @ load 25 cfm Sound (pressure/power): 94.3/107.3 dBA Air inlet: 1/4'' Model Number 326. By Ingersoll-Rand.
? Contoured lever throttle with positive self-locking action prevents accidental starting of motor ? Chrome plated steel spark guard ? Built-in speed regulator ? Heavy-duty motor for tough cutting jobs Specifications: Wheel size: 3'' Free speed: 20, 000 RPM Overall length: 7-1/2'' (191 mm) Net weight: 2 lb. (1.1 kg) Air inlet thread NPT: 1/4'' Average air consumption: 4 CFM Air pressure: 90-120 PSIModel Number 207.By Astro Pneumatic.
Oil-free pump and soft-start motor for long life and quiet operation. High-Flo air regulator to protect against a large drop in pressure. "Bonus Air" [more info..]
Designed with integrated air duster for clearing away dust and debris. Made with lightweight aluminum body and durable composite magazine. Easy to ope [more info..]
Light die cast aluminum body reduces fatigue. Drives from 1.5" to 2" standard 16 Gauge "L" cleat Nails. Ergonomic design with longer handle for ease o [more info..]
Exclusive impact mechanism. Pressure-feed lubrication. Adjustable power regulator. Easy to service two-piece construction. Contoured handle for comfor [more info..]
Please Note: Displayed Prices are subject to change without notice.
Please click "more info" for final price before making a purchase.
Bestselling Air Tools with Customer Reviews
Porter-Cable FCN200 2" Flooring Cleat Nailer from Porter-Cable.
This is a great must have tool for DIY wood floors. While every company that's in the tool business seems to make a nailer (Senco, Bostitch, etc.), what sets the Porter-Cable apart is it's balance and civilized look. The look doesn't matter, but if you don't want to mar the wood floors by having a...
Bostitch MIIIFS Pneumatic Hardwood Floor Stapler from Bostitch.
I run a hardwood flooring company in Wyoming and have 3 of these units running all the time...They are durable and very dependable...we have been experiencing problems with the nuts and bolts holding the bottom plate on. Several of these bolts are in hard to reach areas and come loose and fall out...
Porter-Cable FR350 Round Head Framing Nailer Kit from Porter-Cable.
...I have several projects lined up around the house over the next 12 months. One is a 350 sq ft deck extension and the others involve substantial interior framing. After picking up a great Cambell Hausfeld compressor, a framing nailer seemed the next most obvious tool. I completed significant...
Porter-Cable CFBN200A 2" 18 Gauge Brad Nailer/Compressor Combo Pack from Porter-Cable.
I purchased this kit because I had a ton of baseboard molding to replace. This included everything I needed in one convenient package and is perfectly sized for my needs. I have used it for molding installation and have purchased two additional nailers to use with the compressor: a framing nailer...
DeWalt D51845 Full Round Head Framing Nailer from DeWalt.
I purchased this nailer because it had some features that my Porter Cable did not. Tools free depth adjustment and the rafter hook. Right out of the box the tool leaked air from the back end. I tested it anyway and it felt pretty good except that the trigger is too far away from the handle and it...
Porter-Cable PSH1 HVLP Gravity Feed Spray Gun from Porter-Cable.
I had a body shop for twenty years. When I closed the shop the HVLP designs were in their infancy. The problem was that you could not get a nice job on metallics with such a heavy volume at low pressures. My needs have changed, because the shop is closed, and now I do my own wood refinishing. Clear...
B & C Eagle B18-2 2" Brad Nail (5000-Pack) from B & C Eagle.
Just finished the casing on the closet door frames in my daughters' room. These were flawless in my Accuset 200BN. Never a jam with the 2" brads or the 1 1/4" brads!
Hitachi NV65AH Siding Coil Nailer from Hitachi.
This nailer is like a german sports car. It's got power, performance and handles like a dream. The single most important feature for a good siding nailer is the ability to accurately dial in the depth that the nails are driven. For cedar, or cement board siding the depth of drive is crucial. This...
Senco FP25XP 5/8" to 2-1/8" Brad Nailer from Senco.
I bought the Senco 25 brad nailer last week. The decision between the Porter Cable and the Senco was difficult, I finally based the purchased on the wider range of brad lengths for the Senco and the oil less design . I have used them both and operation between the two is very similar. The Senco is...
DeWalt D55155 2 HP 4 Gallon Hand Carry Electric Compressor from DeWalt.
As a full time contractor working alone I am always on the lookout for tools that will make the job go faster and easier. Last yearI spent many months researching a replacement for my ailing Campbell-Hausfeld oilless compressor. Originally I figured the CH had a higher air output, needed no oil...
Bostitch MIIIFN Industrial Flooring Cleat Nailer from Bostitch.
This air stapler was a life saver. I laid about 1900 square feet in my new house without one misfire. That was just over 20000 staples. The staples held very well and if I had it to do over again, I wouldn't change a thing. This air gun is well worth the money! It took me approximately 18 hours in...
Porter-Cable FR350MAG 3-1/2" Magnesium Round Head Framing Nailer from Porter-Cable.
I gave this nailer four stars because it doesn't come with a case, and I don't think Porter Cable even makes an aftermarket case. Also, the depth of drive adjustment is not the greatest. That being said, this is a fine framing nailer and is lighter then most. I really like the way nails are loaded...
PUR-Hose PUR-14X050 1/4" x 50' Polyurethane Air Hose from PUR-Hose.
Excellent hose, very light weight, and kink free. Also VERY durable, we ran this hose across razor-sharp wire mesh all weekend and not a single leak. Other than the price, the only complaint I have is the ease with which it tangles when coiling, but if you have a reel, this is the hose to get.
Senco SNS45 Construction Stapler from Senco.
I RECENTLEY BOUGHT THIS GUN FOR NAILING OFF PLYWOOD. I COULDN`T BELIEVE THE SPEED IT WOULD SPIT OUT THE STAPLES; IT SOUNDED LIKE AN UZI. THIS IS MY FAVORITE AIRTOOL I HAVE BY FAR! I RECOMMEND THIS GUN TO EVERY HOMEBUILDER!
Porter-Cable PIN100 23-Gauge Pin Nailer Kit from Porter-Cable.
i used two other "major" companys pin nailer and was content w/ them both ...."was".... now i own a p.c. pinner and its been worth every dollar i spent...
Hitachi NV45AB Coil Roofing Nailer from Hitachi.
I own a roofing company in Michigan and for the past 6 years we have been using Hitachi roofing guns. The best thing about them is they are very durable. They have survived many falls, one from 4 storeis up onto a concrete slab and the only thing wrong with it was the top needed to be tightened back...
Porter-Cable BN200A 18 Gauge, 2" Brad Nailer Kit from Porter-Cable.
In addition to the features listed for this nailer, I discovered that it will also shoot 5/8" brads. With this much flexibility, it's really an all-in-one tool. If I could find 1/2" 18 ga. brads, I think it would shoot them as well. I have a lot of respect for Porter-Cable and hope this doesn't make...
