Strait-Line 64001 Strait-Line Laser Line Generator
from Tool Crib.
I recently bought this level and as a carpenter that works alone a lot of the time i have found this to be a super little reference tool. Works great for putting up suspended ceiling tracks in particular.
DeWalt DW077KDK 18-Volt Self-Leveling Rotary Laser Kit (Int/Ext), Including Construction Tripod - a $99.99 Value!
from DeWalt.
This is the best laser I've ever used hands down. I've used (before I started my own business) Spectrum Physics, Topcon, Hilti, and Robotools. I used to think the Spectrum Physics were the best, but this is better than the Spectrum in the fact that it has the battery which helps two ways... first...
Werner 7308 Type 1AA 8' Fiberglass Stepladder, 375-Pound Rated
from Werner.
Tired of flimsy ladders that make you wonder whether you are going to fall off at the first shift in your hips? This is sturdiness at a top level. It is tall, in an 8ft room is comes right to the ceiling, so if you want it for interior work, you might want to think about the 6ft ladder. But it is a...
Wing 10103W Little Giant Ladder System (Extension Height 11' - 19', Stepladder Height 5' - 9')
from Wing.
We first saw this ladder at a home show demonstration and thought it was awesome. The company sells direct, but its a slightly better deal from Amazon with super saver shipping. The ladder system is intuitive to use right of the box. Its aluminum channel construction is a bit heavier than cheap...
Starrett C33H-12-4R 12" Combination Square with Square Head Only
from Starrett.
This is a great square. Absolutely no flaws. You can't go wrong with this tool
Bosch DWM40L Miter Finder Digital Protractor/Angle Finder
from Bosch.
Initially when I looked at this tool, I thought that it was a bit pricey for a digital protractor. Now I find myself using this tool for framing, trim work, and saw alignment. It has been invaluable in checking miter gauges for accuracy, you could use a protractor or speed square, but this is more...
Bil-Jax KT6627-02552-1 Contractor's Scaffolding
from Bil-Jax.
Bil-Jax is the industry leader in scaffolding and this product is one of their best. I've used a number of different scaffold brands and there's a reason why they are number one.
Wizard Detectors 255052 Lumber Wizard Little Wizard Combo Pack
from Wizard Distribution.
Much better at finding studs(by detecting the nails) than using a stud finder. Superb tool for installing crown molding in older homes with plaster walls and difficult to find studs. A real blade saver for the jointer and planer. ...
Bessey KBK2440 Cabinet Door Clamp Kit
from Bessey.
If you want precision and a square product when you are done clamping your work, these are the clamps to buy. I have used the pipe clamps most of my life and against the Bessey clamps they are just junk! The Bessey Clamps are made to last, they clean up easy, and are easy to use. It took me some...
Werner D1228-2 Aluminum Extension Ladder, 225 Pound Rated
from Werner.
This 28'typeII- 225 pound rated werner is a nice extention ladder compared to all other brands simply because it dosen't twist when your in the air. This ladder is pretty much for painting and maintence work but to tell you the truth this ladder can be pretty bouncy when fully extended. I would...
RoboToolz RT-7610-5K Electronic Self-Leveling 5-Beam Level, Square and Plumb Laser, Including Interior Laser Pole - a $69.99 Value
from Toolz.
I know some guys at work who use the older model of this laser, and it seems to work great. The new model takes way too long to level out, and the slightest little jiggle throws it back out of level. I set the laser on my kitchen table to test it. It took an average of 15 seconds for the out of...
Porter-Cable LL3100 Three Bubble Laser Level
from Porter-Cable.
Stabila 24632 Jamber Set with 78" and 32" Levels
from Stabila.
A great setup, except the set needs to come with a 30" level instead of a 32". The most common dorr size in a house is a 2-6 or 30". a 24" level is just too short and a 32" is just a hair long with the caps removed. These levels are top of the line. A must for all finish carpenters.
Telesteps 326XXX 12-1/2' Telescoping Ladder
from Telesteps.
This is a great tool for limited applications. 1st - I wouldn't put more than about 200 lbs on it. 2nd - it is fine to get yourself onto a roof or into an attic, but it is not solid enough to work from. 3rd - you must follow the instructions in opening it, especially being sure that every section...
Sonin 50211S Rapitest Moisture Test Meter
from Sonin.
If you have a couple hundred dollars to blow, you can waste your money on one of those obscenely overpriced name brand moisture meters. If you're looking for something that performs comparatively just as well, but you don't want to spend a fortune, look no further. It may not look as pretty or have...
LaserJamb 3HAND4 3rd Hand Support System 4' to 10' (2-Pack)
from Laserjamb.
As always, Amazon shipped quick and complete. The first job I did with this was to jack up a cardboard-type ceiling that was sagging from a water leak above it. Left the jacks in place for a week til the ceiling dried. Success. Now I am putting up 1/2" 4x8 sheetrock on a ceiling that is 9 ft tall....
Bil-Jax 0026-962-4 8" Swivel Casters with Brake, Set of 4
from Bil-Jax.
Stabila 24816 Journeyman Promotional Set, Includes 48" Level and 16" Level
from Stabila.
In an age of multi-tools and digital special effects, it's great to find a tool that fulfills its primary mission without a user manual, and that holds up to hard knocks. This starter set (a 48" and a 16" spirit level) lets you start right with levels that won't lie to you and don't pretend to be...
X-IT Products AL-30 3-Story Emergency Escape Ladder
from X-IT Products.
Shark Corp 58-9018 Fine Cut Saw and 8" Prybar Combo Pack
from Shark Corporation.
The saw is very accurate. With a single thumb edge on the center of the blade to keep it straight up, you can cut a perfect angle with this saw. Blade removal replacement makes it even more desireable. These are Japanese saws. The Shark company products are available in a lot of stores, so it is not...
Werner PA210 14" Wide Aluminum Extension Plank
from Werner.
Felker TS-40 Rubi Tile Cutter
from Felker.
I found the felker ts 40 to be a very handy cutter. It was very easy to use and cuts could be made very quickly. For the vast majority of the time the cuts were quite straight. On just a few tiles the cut at the lower end of the tile had a very slight curve. I was still able to use the cut tile. For...
Leatherman 67010103H Wave with Deluxe Leather Belt Sheath
from Leatherman.
I got the original leatherman in the summer of 1994 when I was planning to do a lot of camping. Then I upgraded to the Wave as a present for myself around Xmas 98 (the original went in my fishing tackle box). I have worn it every day on my belt, most days accompanied by a compact tape measure as...
Stabila 04100 Manual Leveling Rotating Laser System
from Stabila.
Nice job Stabila! The first time I used this laser I wasn't sure I would like it because even though it is rotating, it is manual leveling. To my surprise, it leveled up very quickly and accurately. The features on this bad boy are great! First of all it has 3 speeds for the rotating mode, this...
Stanley 77-009 IntelliPoint Plus Level
from Stanley.
Sonin 10075 Laser Target Range Finder
from Sonin.
I design office layouts and was hoping this would replace the need to drag around several tape measures. This is a good tool if you want to know approxiamate distances. I found it to be off about 1"-3" for every 10', depending on the temperature. You have to acclimate the tool to the surrounding...
Pro Shot L5XXX Auto Leveling Visible Beam Laser
from Pro Shot.
For a relatively inexpensive self-leveling laser, the L5XXX is perfect for all of your multipurpose uses. Normally, these self-leveling lasers only shoot a plumb beam and a horizontal line, but they are useless for 90 degree horizontal applications. Another great perk with this tool is the...
Stiletto FH10-C 10-Ounce Titanium Finish Hammer
from Stiletto.
I recently purchased this hammer after swinging estwings for the pase 20 years.Recently diagnosed with tendonitus I was looking for a light, shock absorbing hammer to replace my old blue handled classic.I first tried the stiletto framing hammer but found it too bulky and long ,but this little trim...
Adjustable Clamp 8510BP Cabinet Claw (2-Pack)
from Adjustable Clamp.
INSTALL A SET OF CABINETS WITHOUT THESE AND THEN DO A SET WITH THEM. HOW DID I EVER GET ALONG WITHOUT THEM.
Tru-Grip FT8TS 8' Tru-Grip Pro FTR Series
from Griset.
This item is a bit pricey but I have to admit it's worth every penny. I have used it several times now and it delivers everything it says and more. I also purchased the saw base slide, but have not set it up with my saw yet. Even with out the saw base, cuts are as straight as they can be. Thanks
