Search for Tools & Hardware Products | |
|
|
Shop for a
Tools & Hardware by Category
|
|
|
|
Porter-Cable BN125A Factory Reconditioned 18 Gauge 5/8 inch to 1-1/4 inch Brad Nailer Kit - Tool Only
Porter-Cable BN125A Factory Reconditioned 18 Gauge 5/8 inch to 1-1/4 inch Brad Nailer Kit - Tool Only
|
|
Bostitch BT200K-2 Factory Reconditioned 5/8Inch to 2Inch Oil-Free Brad Nailer Kit, 18 Gauge
Bostitch BT200K-2 Factory Reconditioned 5/8-Inch to 2-Inch Oil-Free Brad Nailer Kit, 18 Gauge
|
|
Bostitch BA-W9 3/8InchHx1InchW Corrugated/Mitre Fastener
Bostitch BA-W9 3/8InchHx1InchW Corrugated/Mitre Fastener
|
|
Bostitch F21PL Factory Reconditioned 2Inch - 3-1/2Inch Industrial Stick Framing Nailer, 80 - 120 PSI, 21
Bostitch F21PL Factory Reconditioned 2-Inch to 3-1/2-Inch Industrial Stick Framing Nailer, 80 - 120 PSI, 21
|
|
DeWalt DCA16250 2-1/2 inch 2500 Count Angle Nails
DeWalt DCA16250 2-1/2 inch 2500 Count Angle Nails
|
|
DeWalt DCA16150 1-1/2Inch 2500 Count Angle Nails
DeWalt DCA16150 1-1/2Inch 2500 Count Angle Nails
|
|
Max HN65J 2-1/2Inch High Press Coil Nailer, 170-320 PSI, 100 Nails
Max HN65J 2-1/2Inch High Press Coil Nailer, 170-320 PSI, 100 Nails
|
|
Max SN890CH/34 2Inch - 3-1/2Inch Clipped Head Framing Nailer, 70 - 100 PSI, 90 Nails
Max SN890CH/34 2Inch - 3-1/2Inch Clipped Head Framing Nailer, 70 - 100 PSI, 90 Nails
|
|
Milwaukee 7150-21 18 gauge Brad Nailer Kit
Milwaukee 7150-21 18 gauge Brad Nailer Kit
|
|
Paslode 650213 1-1/4 Inch 18 Gauge Brad Nail 2000/bx
Paslode 650213 1-1/4 Inch 18 Gauge Brad Nail 2000/bx
|
|
Paslode 650215 2 Inch 18 Gauge Brad Nails - 2, 000 Per Box
Paslode 650215 2 Inch 18 Gauge Brad Nails - 2, 000 Per Box
|
|
Senco SCN60 Rugged Duty Coil Framing Nailer, 70 - 120 PSIG
Senco SCN60 Rugged Duty Coil Framing Nailer, 70 - 120 PSIG
|
|
Senco SLS20HF Hardwood Flooring Stapler
Senco SLS20HF Hardwood Flooring Stapler
|
|
Senco FIP18MG FinishPro 18-Gauge 5/8-Inch to 2-1/8-Inch Brad Nailer with Magnesium Housing
Senco FIP18MG FinishPro 18-Gauge 5/8-Inch to 2-1/8-Inch Brad Nailer with Magnesium Housing
|
|
Max NF352-ST/16-50 1Inch to 2Inch 16 Gauge Brad Nailer
Max NF352-ST/16-50 1Inch to 2Inch 16 Gauge Brad Nailer
|
|
Bostitch SB-1850BN Factory Reconditioned Industrial 2Inch Brad Nailer Kit, 18 Gauge
Bostitch SB-1850BN Factory Reconditioned Industrial 2Inch Brad Nailer Kit, 18 Gauge
|
|
DeWalt D51238R Factory Reconditioned D51238 Heavy-Duty 18-Gauge 2-Inch Brad Nailer
DeWalt D51238R Factory Reconditioned D51238 Heavy-Duty 18-Gauge 2-Inch Brad Nailer
|
|
Denver Tools 120019 Brad Nailer
Denver Tools 120019 Brad Nailer
|
|
Senco 810002N SCN45 1-1/4-Inch to 2-Inch Sequential Coil Framing Nailer, 70 - 100 PSIG
Senco 810002N SCN45 1-1/4-Inch to 2-Inch Sequential Coil Framing Nailer, 70 - 100 PSIG
|
|
Senco 3Y0001N HN150 1-1/2-Inch Joist Hanger Nailer
Senco 3Y0001N HN150 1-1/2-Inch Joist Hanger Nailer
|
|
Senco 810001N SCN45 1-1/4-Inch to 2-Inch Dual-Action Coil Framing Nailer, 70 - 100 PSIG
Senco 810001N SCN45 1-1/4-Inch to 2-Inch Dual-Action Coil Framing Nailer, 70 - 100 PSIG
|
|
Max HS90 2-3/8Inch to 3-1/2Inch Full Round Head Stick Nailer, 170 - 320 PSI
Max HS90 2-3/8Inch to 3-1/2Inch Full Round Head Stick Nailer, 170 - 320 PSI
|
|
Bostitch F28WW 2Inch to 3-1/2Inch Industrial Stick Framing Nailer, 1050 in./lbs. - Receive an Instant $50 Rebate with Purchase
Bostitch F28WW 2Inch to 3-1/2Inch Industrial Stick Framing Nailer, 1050 in./lbs. - Receive an Instant $50 Rebate with Purchase
|
|
Max SN883RH 2Inch to 3-1/4Inch Full Round Head Stick Nailer, 70 - 100 PSI, 21 Angle
Max SN883RH 2Inch to 3-1/4Inch Full Round Head Stick Nailer, 70 - 100 PSI, 21 Angle
|
|
Bostitch F28WW Factory Reconditioned 2Inch to 3-1/2Inch Industrial Stick Framing Nailer, 1050 in-lbs
Bostitch F28WW Factory Reconditioned 2Inch to 3-1/2Inch Industrial Stick Framing Nailer, 1050 in-lbs
|
|
Paslode 501000F Factory Reconditioned F-350S PowerMaster Plus Pneumatic Framing Strip Nailer
Paslode 501000F Factory Reconditioned F-350S PowerMaster Plus Pneumatic Framing Strip Nailer
|
|
Milwaukee 7110-20 3-1/2 in. Clipped Head Framing Nailer
Milwaukee 7110-20 3-1/2 in. Clipped Head Framing Nailer
|
|
MAX SN883CH/34 Clipped Head Nailer for Paper Collated Stick Nails, 70 - 100 PSI, 90 Nails
MAX SN883CH/34 Clipped Head Nailer for Paper Collated Stick Nails, 70 - 100 PSI, 90 Nails
|
|
Max CN601J 1-1/2Inch - 2-1/2Inch Positive Placement Coil Framing Nailer, 70 - 100 PSI, 100 Nails
Max CN601J 1-1/2Inch - 2-1/2Inch Positive Placement Coil Framing Nailer, 70 - 100 PSI, 100 Nails
|
|
Max HN75 1-1/4Inch Coil Framing Nailer, 170 - 320 PSI, 300 Nails
Max HN75 1-1/4Inch Coil Framing Nailer, 170 - 320 PSI, 300 Nails
|
|
Max HN90 2Inch - 3-1/2Inch PowerLite Coil Framing Nailer, 170 - 320 PSI, 300 Nails
Max HN90 2Inch - 3-1/2Inch PowerLite Coil Framing Nailer, 170 - 320 PSI, 300 Nails
|
|
Max CN80 2Inch - 3-1/4Inch Heavy-Duty Coil Framing Nailer, 70 - 100 PSI
Max CN80 2Inch - 3-1/4Inch Heavy-Duty Coil Framing Nailer, 70 - 100 PSI
|
|
Max CN70 1-3/4Inch - 2-3/4Inch Heavy-Duty Coil Framing Nailer, 70 - 100 PSI, 225 - 300 Nails
Max CN70 1-3/4Inch - 2-3/4Inch Heavy-Duty Coil Framing Nailer, 70 - 100 PSI, 225 - 300 Nails
|
|
Grip 14012 1/2Inch to 1Inch Air Pin Nailer, 23 Gauge, 120 PSI
Grip 14012 1/2Inch to 1Inch Air Pin Nailer, 23 Gauge, 120 PSI
|
|
Senco Compressor with FP10 Pin Nailer, Hose, Fittings
Senco Compressor with FP10 Pin Nailer, Hose, Fittings
|
|
Senco PC0947/FP18K FinishPro Combo Kit
Senco PC0947/FP18K FinishPro Combo Kit
|
|
Senco 3V0026N ST10-C Double-Length Fine Wire Auto Stapler
Senco 3V0026N ST10-C Double-Length Fine Wire Auto Stapler
|
|
Senco 4A0001N BC58 Button Cap Stapler
Senco 4A0001N BC58 Button Cap Stapler
|
|
Senco PC0781/A20 Pneumatic Palm Nailer, 50 - 125 PSIG
Senco PC0781/A20 Pneumatic Palm Nailer, 50 - 125 PSIG
|
|
|
|
Power Tools
Air Tools
Saws
Cordless Tools
Routers
Hand Tools
Lawn & Garden
Tools
Job Site Equipment
Lawn & Garden Tools
More Tools & Hardware
Brands
Specialty Stores
|
|
In association with

|
Bestselling Nailers, Brad Nailers, Cordless Nailers Framing Nailers, Finish Nailers |
Bestselling Nailers, Brad Nailers, Cordless Nailers, Framing Nailers, Finish Nailers with Customer Reviews |
Porter-Cable FCN200 2" Flooring Cleat Nailer from Porter-Cable.
This is a great must have tool for DIY wood floors. While every company that's in the tool business seems to make a nailer (Senco, Bostitch, etc.), what sets the Porter-Cable apart is it's balance and civilized look. The look doesn't matter, but if you don't want to mar the wood floors by having a... Porter-Cable FR350 Round Head Framing Nailer Kit from Porter-Cable.
...I have several projects lined up around the house over the next 12 months. One is a 350 sq ft deck extension and the others involve substantial interior framing. After picking up a great Cambell Hausfeld compressor, a framing nailer seemed the next most obvious tool. I completed significant... Porter-Cable BN200V12 Cordless 18-Gauge Brad Nailer Kit from Porter-Cable.
I don't do a whole lot of heavy duty nailing. This nailer is convenient and maintains a good charge (about 2 hours with a medium charge/1 hour with a quick charge) for a medium job. I put up a knotty pine ceiling, trim, and molding with no trouble. Because this product was cordless, the job was very... Porter-Cable CFBN200A 2" 18 Gauge Brad Nailer/Compressor Combo Pack from Porter-Cable.
I purchased this kit because I had a ton of baseboard molding to replace. This included everything I needed in one convenient package and is perfectly sized for my needs. I have used it for molding installation and have purchased two additional nailers to use with the compressor: a framing nailer... DeWalt D51845 Full Round Head Framing Nailer from DeWalt.
I purchased this nailer because it had some features that my Porter Cable did not. Tools free depth adjustment and the rafter hook. Right out of the box the tool leaked air from the back end. I tested it anyway and it felt pretty good except that the trigger is too far away from the handle and it... Hitachi NV65AH Siding Coil Nailer from Hitachi.
This nailer is like a german sports car. It's got power, performance and handles like a dream. The single most important feature for a good siding nailer is the ability to accurately dial in the depth that the nails are driven. For cedar, or cement board siding the depth of drive is crucial. This... Senco FP25XP 5/8" to 2-1/8" Brad Nailer from Senco.
I bought the Senco 25 brad nailer last week. The decision between the Porter Cable and the Senco was difficult, I finally based the purchased on the wider range of brad lengths for the Senco and the oil less design . I have used them both and operation between the two is very similar. The Senco is...
Bostitch MIIIFN Industrial Flooring Cleat Nailer from Bostitch.
This air stapler was a life saver. I laid about 1900 square feet in my new house without one misfire. That was just over 20000 staples. The staples held very well and if I had it to do over again, I wouldn't change a thing. This air gun is well worth the money! It took me approximately 18 hours in... Hitachi NT65MA 1-1/4"-2-1/2" 15 Gauge Angled Finish Nailer with Air Duster from Hitachi.
I currently run four Hitachi, three Senco, and two Max finish nailers. The Hitachi NT65MA is the best nailer I have. It is very light with minimal recoil. It has enough power to sink nails in maple effortlessly. It is stone cold reliable- it has never broken a driver after four years of fulltime...
Porta-Nails 401P Porta-Nailer Hardwood Floor Nailer from Porta-Nails.
The old way of a hammer, chisel, and finish nailer dont even compare. What I could do in an hour the old way I can do in 15 min with this tool. It really does pull bent wood straight and tight! Calculate what you make on a flooring job and figure you could have finished at least another similar... Porter-Cable FR350MAG 3-1/2" Magnesium Round Head Framing Nailer from Porter-Cable.
I gave this nailer four stars because it doesn't come with a case, and I don't think Porter Cable even makes an aftermarket case. Also, the depth of drive adjustment is not the greatest. That being said, this is a fine framing nailer and is lighter then most. I really like the way nails are loaded... Porter-Cable PIN100 23-Gauge Pin Nailer Kit from Porter-Cable.
i used two other "major" companys pin nailer and was content w/ them both ...."was".... now i own a p.c. pinner and its been worth every dollar i spent... Paslode 500970 T250-F16 Finish Nailer from Paslode.
...I got to be good with it too, I could take it down like the video shows you an clean & oil it in my sleep. In the end though I did not feel it was convenient enough, for the cost of their aerosol spray and short fuel cells. Concerning the pneumatic one however, some at the job site ... Hitachi NV45AB Coil Roofing Nailer from Hitachi.
I own a roofing company in Michigan and for the past 6 years we have been using Hitachi roofing guns. The best thing about them is they are very durable. They have survived many falls, one from 4 storeis up onto a concrete slab and the only thing wrong with it was the top needed to be tightened back... Bostitch RN45B-1H30 Coil Roofing Nailer with Free Hammer Stapler from Stanley.
This has been a very reliable nailer for me. It make easy work of putting on a roof. It is light weight, and nails quickly. Porter-Cable BN200A 18 Gauge, 2" Brad Nailer Kit from Porter-Cable.
In addition to the features listed for this nailer, I discovered that it will also shoot 5/8" brads. With this much flexibility, it's really an all-in-one tool. If I could find 1/2" 18 ga. brads, I think it would shoot them as well. I have a lot of respect for Porter-Cable and hope this doesn't make...
Porter-Cable PN650 Palm Nailer Kit from Porter-Cable.
I had to replace the plate/seal around the bottom of my house due to termite damage. The palm nailer made it a breeze to nail the floor joices back into the the new plate. I was working in a very tight spot with electrical wires and plumbing pipes running right in front of where I needed to nail. I... Hitachi NV45AB2 Roofing Nailer from Hitachi.
the roofing nails went all the way in and the wood didn't split...
Porter-Cable FN250B 16-Gauge, 2-1/2" Finish Nailer Kit from Porter-Cable.
This is the first power nailer Iv'e used....it beats the heck out of a hammer!! ..but the "sights" are sloppy and the blows are very inconsistant, seems to hit heavy and light on the same setting. Bostitch N88RH-1BAG High Power Round Head Stick Framing Nailer with Free Carrying Bag from Bostitch.
I hesitated purchasing this nailer because of one review hear on Amazon.com. After researching more, I decided to give it a go. My experience was: 1) Nails easy to find in my area (find out what is more commong in your area, clipped head or round head) 2) No misfires/jams. Not a single one... Bostitch N88WW-1BAG High Power Stick Framing Nailer with Free Carrying Bag from Bostitch.
This nailgun is my first and I have been very pleased with it. I have been helping to build a log style house and have used it to nail everything. I have run #12, #10, and #8 nails thru it. The only problem I have had was a bad batch of nails. We got to looking at the nails and found that the nails... Porter-Cable DA250B 15-Gauge, 2-1/2" Angle Nailer Kit from Porter-Cable.
I purchased the DA250A in May 2002, I have already returned one due to a broken part, and now in October I am going to have to replace the driver blade. This nailer has good power, and the balance is fairly good. I don't feel that this nailer will stand up to frequent use on the job site. I have... Paslode 900600 Impulse Angle Finish Nailer from Paslode.
We own several different Paslode nail guns, including the framing nailer and the straight finish nailer. We began using the Paslode products about 4 years ago. I will say that the new guns we have purchased in the last few months are significantly better than the quality of the guns purchased just a... Senco SFN40K 15-Gauge Finish Nailer with Case from Senco.
I purchased my Senco SFN40 about 4 years ago. I also purchased their SLP20 18 gauge brad nailer. Prior to that time, I owned a Bostitch N60. As a trim carpenter, my nailers are used on a daily basis. Their Neverlube design eliminates oil exhaust spray and I don't have to be bothered toting oil... Paslode 900420 Impulse Cordless Framing Nailer from Paslode.
When me and my brother in law decided to build my house, I started looking for something to help us out. Neither one of us ever owned any kind of nail gun or phneumatic tools. I asked around and read the reviews on your web site. DeWalt D51238K 18-Gauge Brad Nailer Kit from DeWalt.
I bought a DeWalt nail gun near the end of last year. Since then I've driven several boxes of nails with it, mostly without any hitches. I've used it nearly every day for building cabinets and installing mouldings. This is my third brad nailer. My first one was a Senco SLP20, a fabulous gun. I never... Paslode 900400 Trimpulse Solid State Finish Nailer from Paslode.
The paslode trimpulse is a good tool but with any cordless tool there are always some trade-offs! I own 1 Trimpulse, two Bammer models and an older model Paslode Impulse. The Bammer models have turned out to be the better buy in not only price. The paslode trimpulse and impulse both work well with... Porter-Cable CPFFC350 3-1/2" Clipped Head Framing Nailer and 3 HP Compressor Kit from Porter-Cable.
This is a great package. I have built a large addition and used this gun for the entire project. I had no problem driving nails flush through engineered laminated beams, not the case with a Senco nailer which had trouble with this material. A great deal for the occasional user.
|
Browse for more Nailers --->
Browse Nailers
Browse Brands Browse more... >> Click here for top sellers in Nailers
Do a Quick Search for Nailers!
Browse Power Tools Browse Hand Tools Browse Job Site Equipment Browse Lawn & Garden Tools Browse More Tools & Hardware Browse Brands Browse Specialty Stores Browse more... >> Click here for top sellers in Tools & Hardware
|