Performax 629004K 16-32 Plus Drum Sander, Including Stand
from Performax.
I have been using a 16-32 for about a year in my home shop and am mostly satisfied with it. I bought the unit used and without a manual. The manufacturer sent one free of charge upon request. Long lengths are hard to run evenly so you need to rough cut to length before sanding. It is fine for a...
Powermatic 1791291K Model 31A Belt/Disc Sander
from Powermatic.
Bosch 1274DVS 3" x 21" Dustless Variable Speed Belt Sander
from Bosch.
This is an extremely well-designed and well-built sander. I have used many sanders and been disappointed by poor design and bad belt-changing clamping systems. Its variable speed eliminates the need to press harder or softer on the sanding surface, cutting down on the chance of gouging material or...
Porter-Cable 362VS 4" x 24" Variable Speed Sander
from Porter-Cable.
I have had alot of experience with the Porter Cable sanders. My previous job requiered laminating and the use of a good belt sander was a must. the only product we used were the Porter Cables. At that time they were still the same size and shape but lacked the power and the variable speed. a great...
Bosch 3727DVS 6" Variable Speed Dustless Random Sander
from Bosch.
I was in the market to replace my B&D orbital that was quite wore out and decided on the Bosch after evaluating the company and magazine articles available. The review on in the wood magazine made it out to be an uncontrolable sander, but I found it easy to control and the circular revolutions...
Fein MSF-636-1K Random Orbit Sander with Vacuum
from Fein.
At the risk of being the odd man out. I just came from the WoodWorks2002 show at the Ft Washington PA Center. Top names were there demonstrating, as well as vendors with their wares. Fortunately the Fein sander vac combination, with all of the Fein sanders were there to use. The rep attached each of...
Porter-Cable 333VS 5" Quicksand Variable Speed Random Orbit Finishing Sander
from Porter-Cable.
The Porter-Cable 333VS Quicksand random orbital sander is simply the best 5" random orbital sander on the market. The tool is very solidly built, with superb fit and finish. The excellent ergonomic design allows the tool to be held very comfortably with a variety of hand positions. The hook-and-loop...
Porter-Cable 7800P Drywall Sander
from Porter-Cable.
For the money that was paided for this item, It should have come with an operation demo video. The instruction manual needs more help.
DeWalt DW431 3" x 21" Heavy Duty Variable Speed Electronic Belt Sander
from DeWalt.
This is my favorite belt sander for shaping corners, edges and any work where you need a "light touch." I also own several 4x24 Porter Cables including the 503 - the locomotive of all belt sanders. The big sanders are great for flattening panels, but not much fun when you are using the sander to...
Porter-Cable 97366 6" Variable Speed Sander Kit with Dust Collection Hood
from Porter-Cable.
I use this sander primarily to strip paint of the bottom of my sailboat and it works great. Vacuum dust collection is required by the marina and this works fine as well. However, there will still be dust in the air and the combination of sander and vacuum is noisy so a good dust mask and ear plugs...
Porter-Cable 352VS 3" x 21" Belt Sander with Dust Bag
from Porter-Cable.
After purchasing -- and returning -- the Makita 3X18 belt sander, I bought the Porter-Cable 352VS (eee my review of the Makita). What a difference! This sander is powerful. I sanded three layers of old paint off a door in about 1/2 hr. The body is constructed of metal, giving it a nice solid feel....
Delta SA350K Shopmaster Boss Spindle Sander with Complete Spindle Sander Set
from Delta.
The Delta spindle sander I received had some minor problems. The unit was noisy. Under the 2 year warranty I could have taken it to a service location, but that would have meant a delay. Instead I made the adjustment noted in the directions. This adjustment is supposed to be made after many hours of...
Mirka 23-615-AP 5" 8 Hole Dustless Hook and Loop Assortment Pack Sandpaper
from Mirka.
I absoulutely love the Mirka 5" Dustless Hook and Loop Assortment Pack. It included everything I need to start sanding all the different woodworking projects that I do. I was impressed with how long the disks lasted and how well they stayed in place on my Makita Orbital Disk Sander.
Delta SA180 Shopmaster 1" Belt & 8" Disc Sander
from Delta.
Though I was disappointed when I found that Delta had discontinued the model the SA180 replaced, I am very pleased with this sander. It is well built, looks good and heavy enough and "tight" enough to operate vibration free. I am especially impressed with the spring loaded handles used for adjusting...
Metabo SXE450 00458 6" Random Orbit Sander
from Metabo.
I HAVE BEEN USING THIS SANDER FOR THREE MONTHS NOW, AND I CAN WITH A DOUBT SAY IT IS ONE THE BEST ORBITAL SANDERS I'VE USED THUS FAR. NOT ONLY CAN IT CUT QUICK - BUT WITH A SIMPLE PUSH OF A BUTTON YOU CAN ADJUST THE ORBIT TO 1/8th INSTEAD OF 1/4 ROTATION. THIS 1/8 SETING WILL GIVE IT A S W I R L F R...
Porter-Cable 97355 5" Variable Speed Random Orbital Sander Kit includes Carrying Case and Dust Kit a $30.00 Value
from Porter-Cable.
Used to use my speed block to sand most of my work. Got this unit & it beat the pants off the speed block. Just got to get the hang of it.
JET JOVS-10 / 708411 Oscillating Vertical Spindle Sander
from JET.
I hate sanding and I do most by hand with various size blocks, dowels and such. The only power sander I regullary use is a 6" belt on a stand. This is good for outside curves.
I had been looking at spindel sanders for a while and keep coming back to this one, because it includes up to 4" drum and...
DeWalt DW423K 5" Heavy Duty Random Orbit Sander with Electronic Variable Speed
from DeWalt.
I found this to be a great little sander. Though some have hadobjections to the switch design, I found this to be no problem atall. I have used mine to finish raw wood projects and for refinishing as well. I even went so far as to use it to refinish a hardwood floor in a small room! No swirl marks...
Mirka 23-615-100 5" 8 Hole Dustless Hook and Loop 100 Grit (For DeWalt DW421, DW423, 5" Ryobi, Bosch 3107, 3725)
from Mirka.
I have been using these discs for years.I really like the diapenser pack box. It keeps them in until you pull one out. The paper cut very well and lasts reasonably long. Better can be had but you'll spend a lot more for them. Use these until they lose their edge and slap a new one on. If your time...
Jet 708598K Combination 12" Disc / 6" x 48" Belt Sander with Enclosed Stand
from JET.
Awesome. Jet is the way to go! High quality and great performance.
Porter-Cable 330P Speed-Bloc Finishing Sander
from Porter-Cable.
Not much to say except that this is the best little finishing sander I've used. Vibration is so smooth, that you can use this little puppy all day and your hand still feels like your hand. I like the cost of plain old 1/4 sheet paper, so this is another plus and the shape of its body makes natural...
Factory-Reconditioned Porter Cable 362R 4" X 24" Belt Sander
from Porter-Cable - Reconditioned.
The belt sander was returned immediately due to it's condition. It was supposed to be factory reconditioned "Like new". It was covered in heavy sawdust and the collector bag had a large hole in it. The collector tube was so out of shape it would not attach to the sander. Stick to the new products...
Porter-Cable 7336 6" Variable Speed Random Orbit Sander Only
from Porter-Cable.
I use this product to polish and wax my car and I am very happy with it. The multi-speed settings allow you to make sure you don't over-do-it and keep control. Its fairly comfortable to use and you don't fatigue too quickly with prolonged use. My car has never looked better.
Mirka 23-614-AP 5" 5-Hole Dustless Hook and Loop Assortment Pack Sandpaper
from Mirka.
I build Western Red Cedar outdoor furniture and needed a good sander and sandpaper that would hold up to all day usage. I purchased the variety pack and find that all grades of paper to solve my everyday needs for finishing my chairs. I've tried other brands and they all seemed to evaporate quickly....
Performax 98-1601 Infeed and Outfeed Tables
from Performax.
This is a great addition to the Performax 16-32 drum sander. the infeed outfeed tables allow for the use of longer boards, and a 'storage/holding' area for smaller items. More importantly, with the longer boards, it offers support to the sander, taking the possible stress and weight away from the...
Performax 60-9080 80 Grit Ready-To-Cut
from Performax.
Mirka 23-615-150 5" 8 Hole Dustless Hook and Loop 150 Grit (For DeWalt DW421, DW423, 5" Ryobi, Bosch 3107, 3725)
from Mirka.
I have used several grits of this sand paper while building a log home. We would used 60, 80, 120, and 150 to get the finish we needed. The 60 and 80 took off the sun yellowing and 120 and 150 gave a great finish for sanding sealer and polyeurathane. I used both 8 hole and 5 hole with my dewalt and...
Bosch 1276DVS 4" x 24" Dustless Variable Speed Belt Sander
from Bosch.
This is my favorite tool! I have abused this sander for the past 3 years and it keeps on humm'in. It is so smooth, powerful, lightweight, and easy to handle. If you are a professional woodworker like me or woodworking is your hobby this is the ONLY belt sander to have. It's the quietest belt sander...
Black & Decker MS500K Mouse Sander / Polisher / Detail Sander Kit with 14 Accessories
from Black & Decker.
This sander has some great features, but it has two major drawbacks. 1) replacement sanding pads are ridiculously overpriced. If you buy any manufacturer's quarter-sheet sander that uses standard sanding sheets, you will save a considerable amount of money over time. There is a little more labor...
Dremel 6000 Contour Sander Kit
from Dremel.
It is dependable, comfortable and yields quality results. The sander stays on the work bench at the left end of my Delta #46-250 wood lathe, always ready to work. It has become a vital tool in support of my production of 40-60 peg tops per week. To save time spent changing diamond pads and sanding...
